SATEL Grade 2 Dual Tech Motion Detector




detects motion in the protected area. Additionally, the detector has a set of LEDs to implement the lighting feature.

  • compliance with EN 50131 requirements for Grade 2
  • motion detection using two sensors: a passive infrared (PIR) sensor and a microwave (MW) sensor
  • adjustable detection sensitivity of both sensors
  • option to test the sensors separately
  • digital motion detection algorithm
  • digital temperature compensation
  • digital filter of signals received by the microwave sensor to ensure immunity to false alarms caused by the power network and discharge lamps
  • operating mode selection: basic, advanced, PIR or MW
  • option to enable/disable the creep zone protection
  • wide-angle lens, designed specifically for SLIM LINE detectors
  • option to replace the wide-angle lens with a curtain (CT-CL) or long-range (LR-CL) one
  • ability to configure detector operating parameters using the OPT-1 keyfob
  • built-in end-of-line resistors (2EOL: 2 x 1,1 kΩ / 2 x 4,7 kΩ / 2 x 5,6 kΩ)
  • lighting feature implemented with white LEDs
  • remote lighting control or motion activated lighting capability
  • LED indicator
  • selectable color of LED indicator (7 colors available)
  • LED indicator remote enable/disable
  • remote switching between two sets of detector operating parameters
  • configuration mode remote enable/disable
  • supervision of motion detection and supply voltage circuit
  • tamper protection against opening of enclosure and removal from mounting
  • adjustable mounting holder (BRACKET D) included

One enclosure, many devices

Elegant, slim enclosure is made of high quality plastic.
Uniform appearance of all detectors installed in the premises makes 
it difficult for an intruder to identify the specific model used in the system 
because all of them look the same.


See the characteristics of the Slim Line Detectors

See Technical Specs for Lenses

Reliable motion detection

A unique lens 

Each detector comes with a modern lens designed and manufactured in
Japan – specially for SATEL. It provides a very large detection area with 
dimensions up to 20 m x 24 m and 90° viewing angle.

                                                                               Japanese Optics             coverage area               Detection Angle
                                                                                                                                  20x24m                               90°


Design of the lens, as well as the material of which it was made, make it exceptionally resistant to deformation. 

New motion detection algorithm

Many years of experience in the production of motion detectors and the use of the latest technologies made it possible 
to develop an advanced new generation algorithm of motion detection. Because of it, SLIM LINE detectors ensure 
reliable detection of intruders throughout the entire monitored area, without triggering unwanted alarms

Digital temperature compensation 

 SLIM LINE detectors dynamically adjust the motion detection algorithm to changes in ambient 
temperature, so these changes do not affect the effectiveness of the detectors

See a presentation of SLIM LINE detectors

Quick lens replacement 

As you can easily replace the complete front part with the lens, the SLIM LINE detectors* can be quickly and 
conveniently customized to suit the needs of the premises, e.g. to the shape of protected room. The wide-angle (WD) lenses are fitted 
as standard, but curtain (CT) and long-range (LR) lenses are also optionally available  *except for PET detectors 

Sign Up