SATEL PIR Motion Detector

SKU: SATEL-APD-200
SATEL Shop SATEL

The APD–200 detector is designed for operation as part of the ABAX 2/ABAX two–way wireless system.




 satel

The APD–200 detector is designed for operation as part of the ABAX 2/ABAX two–way wireless system. It is certified for compliance with the requirements of EN 50131 Grade 2.


Features:

Certificate of compliance with the requirements of EN 50131 Grade 2 

Double pyroelement (passive infrared detector) 

State–of–the–art wide angle lens 

Detection area 15 m x 24 m, angle 90° 

Optional lens replacement with the curtain lens (CT–CL) or long–range lens (LR–CL) 

Advanced digital signal processing 

Dynamic compensation of temperature changes in the protected premises 

Compatible with: ABAX 2 system controllers (ACU–220 and ACU–280) and ARU–200 radio signal repeater ABAX system controllers (ACU–120, ACU–270, ACU–250 and ACU–100 (min. version 4.04), INTEGRA 128–WRL control panel and ARU–100 radio signal repeater – the required version of the device firmware should be checked in its description on the website.

Range of radio communication in the open area: in ABAX 2: up to 2000 m (with ACU–220) / up to 1600 m (with ACU–280) in ABAX: up to 500 m 

Remote configuration and updating of the firmware 

Built–in temperature sensor (temperature measurement from –10°C to +55°C) 

Option to enable/disable creep zone control 

LED indicator of violations in test mode 

Low energy consumption and battery status check 

"ECO" option for extending battery life (in ABAX 2 only) 

Power supply: CR123A 3 V battery 

Adjustable bracket for wall–mounting or ceiling–mounting 

Tamper protection against opening of the enclosure / removal from the mount

Sign up for our newsletter

We only use your email address to add you to our mailing list for receiving our newsletters(monthly). This information is only kept in our mailing list and not for any other purposes than for contacting you with our newsletters.

Thank you for your submission! You will hear from us soon.