Satel LTE/4G Universal multi-purpose communicator module

SKU: SATEL-GSM-X-LTE

GSM-X LTE offers extensive communication functionality and support for multipath communication. The device comes with a cellular phone that supports data ...





Listed for Support Purposes Only

 


GSM-X-LTE

Satel LTE/4G Universal multi-purpose communicator module


GSM-X LTE offers extensive communication functionality and support for multipath communication. The device comes with a cellular phone that supports data transmission using LTE* technology.
The module can be used to implement reporting in alarm systems. For this purpose, it should be connected to the dialer or suitably configured outputs of the control panel. An important feature of the device is its expandability by adding the GSM-X-ETH.

Ethernet module, so that reporting can be implemented using two independent paths (data transmission via cellular network* and Ethernet). Another option to add the GSM-X-PSTN module, in which case the analog PSTN telephone line will be used as an alternative transmission path. Thanks to constant monitoring of the state of connections with the monitoring station and substitutability of transmission paths, the stringent EN 50136 requirements for the so-called Dual Path Reporting are met.

GSM-X LTE allows sending notifications to 8 telephone numbers – this can be done in several ways: using voice, SMS or PUSH messages, or the CLIP service. The module offers extensive compatibility with the INTEGRA and INTEGRA Plus control panels. When connected to the control panel RS-232 interface, it will perform reporting and messaging (in the case of INTEGRA Plus, the SMS content is based directly on the event log). It also enables remote programming of these control panels from a computer with the DLOADX program and administration of alarm systems using the GUARDX program.

The device can fully replace the analog telephone line, working as a backup communication path. When the line is not available, the module will divert voice calls to the cellular network. In the case of PBX systems, it can be used as an additional external line.

GSM-X LTE is provided with 4 programmable outputs that can be controlled remotely using SMS, CLIP, DTMF, GX CONTROL mobile application, GX Soft configuration software or via IoT. Consequently, the module can be used to remotely control the alarm system or other devices.

For programming and configuration, you should use a computer with the GX Soft program installed. The computer can connects to the module locally (USB port) or remotely (data transmission via cellular network* / Ethernet**).

Remote update of the device firmware is possible owing to the module compatibility with the UpServ update server.

The built-in cell phone has two slots for nano-SIM cards. If communication with the first card operator's network fails, the module automatically switches to the other one to keep communication uninterrupted.

  • Dual Path Reporting support acc. to EN 50136**/*** 
  • Event reporting: audio (over cellular / PSTN*** network) / SMS / LTE* / Ethernet** 
  • Conversion and retransmission of event codes received from other devices (simulation of telephone monitoring station) 
  • Sending notifications to up to 8 telephone numbers 
  • Messaging: audio / SMS / PUSH / CLIP 
  • Conversion of PAGER messages to SMS 
  • Simulating analog telephone line using cellular connection – GSM gateway 
  • Switching connections to the cellular network in case of analog telephone line trouble 
  • Compatibility with INTEGRA and INTEGRA Plus control panels

Sign up for our newsletter

We only use your email address to add you to our mailing list for receiving our newsletters(monthly). This information is only kept in our mailing list and not for any other purposes than for contacting you with our newsletters.

Thank you for your submission! You will hear from us soon.